Brusan Molding Cloth

Safety

http://ideaspot.net/world/countriesuz/small/usa-sm.gifUsers shall wear gloves when cutting and shaping Brusan ™.

 http://ideaspot.net/world/countriespt/small/spain-sm.gifEl usuario debe utilizar guantes al momento de cortar y moldear con Brusan ™.

 http://ideaspot.net/world/countriesfj/small/france-sm.gifLe port de gants lors de la mise en forme du produit est fortement recommandé.

 

Tips

If you have any tips or “how to” advice regarding Brusan ™ handling, we will be glad to post it here with full credit to you and your organization.

Tips from “La Boutique du Spectacle”. www.la-bs.com

Now that you have given your Brusan ™ the perfect shape you were striving for, how do you keep it for eternity, or at least for some time?

There are several ways:

1.      Externally:

1.1.   Flexible.

 If you prefer to keep your Brusan ™ flexible, you may brush a Polyurethane clear resin.

1.2.   Solid.

If you brush Crystal Clear Casting Resin on your work, it will become non-flexible and it will waterproof the Brusan ™ to the extent you may run a small waterfall[1].

2.      Internally:

2.1.   Flexible:

If you apply Spray Polyurethane Foam (SPF) on the aluminum side of Brusan ™ your piece will be somewhat flexible.

2.2.   Solid:

2.2.1.      Pistol Spray Plastic Molding on the inside.

2.2.2.      Using a concrete sprayer, apply Due Matrix NEO, a polymer modified gypsum.

 

ATTENTION: Once cured, your sculpture’s shape cannot be modified. Of course, you may still apply paint or patina to it.

[1] Please contact us should you need to make a very large waterfall, we could make a custom waterproof Brusan for you.